National Loop Co. 46' (6' X 17') Direct Burial Vehicle Detection Loop with 100' Lead-In for 23' Wide Driveways - K-NL23-14-100

National Loop Co. 46' (6' X 17') Direct Burial Vehicle Detection Loop with 100' Lead-In for 23' Wide Driveways - K-NL23-14-100

With traffic flowing in and out all day, the National Loop Co. 46' Direct Burial Vehicle Detection Loop with its 100' lead-in detects a vehicle the instant it rolls over the wire, counts as one of the two means of entrapment protection UL 325 expects from automatic gates. It goes into the ground before the surface does, buried under new asphalt, concrete, or gravel. Total wire runs 46' in a 6' x 17' pattern made for 23' wide driveways, including small business customer entrances and oversized residential drives.
Part Number: K-NL23-14-100
$241.08 each $241.08 each
OR
 

Details

National Loop Co. 46' (6' X 17') Direct Burial Vehicle Detection Loop with 100' Lead-In for 23' Wide Driveways - K-NL23-14-100

Placed before the paving crew arrives, the National Loop Co. 46' Direct Burial Vehicle Detection Loop with 100' Lead-In is a 14 AWG inductive loop that disappears under the finished surface. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Installation is a lay-and-pave job: set the loop on the graded sub-base, run the lead-in to the detector, and let the paving crew cover it. Its 17' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to oversized residential drives and small business/customer entrances.

Features:

  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
  • Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
  • Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
  • Factory-set turn count means optimal read range without any on-site adjustment
  • More cost-effective than hand-wound loop installations
  • Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system

Specifications:

  • Loop type: Direct burial
  • Total loop length: 46'
  • Loop dimensions: 6' x 17'
  • Lead-in length: 100'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 23'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number K-NL23-14-100?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 100'
Loop Length Size 6' X 17'
Total Loop Length 46'
SKU K-NL23-14-100
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC