Details

National Loop Co. 38' (6' X 13') Direct Burial Vehicle Detection Loop with 100' Lead-In for 19' Wide Driveways - K-NL19-14-100

The National Loop Co. 38' Direct Burial Vehicle Detection Loop with 100' Lead-In is a 14 AWG inductive loop that arrives preformed and ready to install, with its lead-in attached as part of the same continuous wire. Wired to compatible automated system, the loop counts as one of the two means of entrapment protection UL 325 requires for gate operators, detecting the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Since the conduit protects the wire, the loop sits directly on the sub-base and gets buried under the new asphalt, concrete, or gravel surface. With the 13' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits 2-car drives with extra walkway room and estate-style rural homes.

Features:

• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations
• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters

Specifications:

• Loop type: Direct burial
• Total loop length: 38'
• Loop dimensions: 6' x 13'
• Lead-in length: 100'
• Wire gauge: 14 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 19'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes