National Loop Co. 28' (4' X 10') Direct Burial Vehicle Detection Loop with 75' Lead-In for 14' Wide Driveways - K-NL14-14-75

National Loop Co. 28' (4' X 10') Direct Burial Vehicle Detection Loop with 75' Lead-In for 14' Wide Driveways - K-NL14-14-75

Every safe automatic gate starts with reliable detection, and the National Loop Co. 28' Direct Burial Vehicle Detection Loop with its 75' lead-in detects a vehicle the instant it rolls over the wire, supplies one of the two means of entrapment protection UL 325 lists for gate systems. It goes into the ground before the surface does, buried under new asphalt, concrete, or gravel. Total wire runs 28' in a 4' x 10' pattern made for 14' wide driveways, including long rural drives and roomy single-car or snug 2-car lots.
Part Number: K-NL14-14-75
$199.79 each $199.79 each
OR

Details

National Loop Co. 28' (4' X 10') Direct Burial Vehicle Detection Loop with 75' Lead-In for 14' Wide Driveways - K-NL14-14-75

Every new paving project gains reliable vehicle detection with the National Loop Co. 28' Direct Burial Vehicle Detection Loop with 75' Lead-In, a preformed 14 AWG inductive loop. Once a loop detector reads its signal, the loop covers the non-contact vehicle detection that UL 325 requires as one of the two means of entrapment protection for automated gates. Crews place the loop on the prepared sub-base before paving, and the new asphalt, concrete, or gravel surface locks it in place. Its 10' side spans the travel lane while the 4' side runs in the direction of traffic, leaving roughly 2' of clearance on each edge, an arrangement well suited to wide single-car or tight 2-car driveways and long rural drives.

Features:

  • Factory-set turn count means optimal read range without any on-site adjustment
  • More cost-effective than hand-wound loop installations
  • Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
  • Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
  • Fully assembled at the factory, so there is nothing to wind, count, or connect before paving

Specifications:

  • Loop type: Direct burial
  • Total loop length: 28'
  • Loop dimensions: 4' x 10'
  • Lead-in length: 75'
  • Wire gauge: 14 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 14'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number K-NL14-14-75?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 75'
Loop Length Size 4' X 10'
Total Loop Length 28'
SKU K-NL14-14-75
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC