Details

National Loop Co. 84' (6' X 36') Direct Burial Vehicle Detection Loop with 30' Lead-In for 42' Wide Driveways - E-NL42-18-30

Designed to be paved over, the National Loop Co. 84' Direct Burial Vehicle Detection Loop with 30' Lead-In is a preformed 18 AWG inductive loop for new-surface installations. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator the non-contact detection that fills one of the two UL 325 entrapment protection slots. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. The 36' side covers the travel lane with roughly 3' of clearance on each side, and the 6' side reads vehicles as they roll through, making it a fit for wide industrial driveways, truck wash facilities, and large church or school parking lot entrances.

Features:

• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations
• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather

Specifications:

• Loop type: Direct burial
• Total loop length: 84'
• Loop dimensions: 6' x 36'
• Lead-in length: 30'
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 42'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes