Details

National Loop Co. 72' (6' X 30') Direct Burial Vehicle Detection Loop with 50' Lead-In for 36' Wide Driveways - E-NL36-18-50

Preformed and pave-ready, the National Loop Co. 72' Direct Burial Vehicle Detection Loop with 50' Lead-In is an 18 AWG inductive loop for direct burial under asphalt, concrete, or gravel. Working through a compatible loop detector, it detects the metal mass of vehicles above, satisfying the non-contact detection that UL 325 lists as one of its two required means of entrapment protection. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. Its 30' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to truck yards, heavy equipment facilities, and agricultural processing entrances.

Features:

• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment
• More cost-effective than hand-wound loop installations

Specifications:

• Loop type: Direct burial
• Total loop length: 72'
• Loop dimensions: 6' x 30'
• Lead-in length: 50'
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 36'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes