National Loop Co. 60' (6' X 24') Direct Burial Vehicle Detection Loop with 50' Lead-In for 30' Wide Driveways - E-NL30-18-50
Details
National Loop Co. 60' (6' X 24') Direct Burial Vehicle Detection Loop with 50' Lead-In for 30' Wide Driveways - E-NL30-18-50
Sized to match a specific driveway width, the National Loop Co. 60' Direct Burial Vehicle Detection Loop with 50' Lead-In is a factory-wound 18 AWG loop for pave-over vehicle detection. Working through a compatible loop detector, it detects the metal mass of vehicles above, satisfying the non-contact detection that UL 325 lists as one of its two required means of entrapment protection. Installation is a lay-and-pave job: set the loop on the graded sub-base, run the lead-in to the detector, and let the paving crew cover it. With the 24' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits double-wide commercial entrances, equipment yards, and storage facilities.
Features:
- Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
- Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
- One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
- Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
- Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
- Factory-set turn count means optimal read range without any on-site adjustment
- More cost-effective than hand-wound loop installations
Specifications:
- Loop type: Direct burial
- Total loop length: 60'
- Loop dimensions: 6' x 24'
- Lead-in length: 50'
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 30'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Direct Burial |
|---|---|
| Lead-In Length | 50' |
| Loop Length Size | 6' X 24' |
| Total Loop Length | 60' |
| SKU | E-NL30-18-50 |
| Product Type | Direct Burial Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |
| Specification Sheet | Download PDF file |