Details

National Loop Co. 56' (6' X 22') Direct Burial Vehicle Detection Loop with 150' Lead-In for 28' Wide Driveways - E-NL28-18-150

Contractors laying new asphalt, concrete, or gravel can set the National Loop Co. 56' Direct Burial Vehicle Detection Loop with 150' Lead-In directly on the sub-base and pave right over it. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. Its 22' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to apartment complex entrances and farm or agricultural property gates.

Features:

• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather

Specifications:

• Loop type: Direct burial
• Total loop length: 56'
• Loop dimensions: 6' x 22'
• Lead-in length: 150'
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 28'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes