Details

National Loop Co. 50' (6' X 19') Direct Burial Vehicle Detection Loop with 125' Lead-In for 25' Wide Driveways - E-NL25-18-125

Sized to match a specific driveway width, the National Loop Co. 50' Direct Burial Vehicle Detection Loop with 125' Lead-In is a factory-wound 18 AWG loop for pave-over vehicle detection. Connected to a loop detector, it reports every vehicle that crosses the sensing area, giving the gate operator the non-contact detection that fills one of the two UL 325 entrapment protection slots. The pave-over design means no slot cutting: the loop goes down on the graded base and the fresh surface finishes the installation. With the 19' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits estate properties, horse farms, and private road entrances.

Features:

• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection

Specifications:

• Loop type: Direct burial
• Total loop length: 50'
• Loop dimensions: 6' x 19'
• Lead-in length: 125'
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 25'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes