Details

National Loop Co. 46' (6' X 17') Direct Burial Vehicle Detection Loop with 30' Lead-In for 23' Wide Driveways - E-NL23-18-30

For driveways getting a fresh surface, the National Loop Co. 46' Direct Burial Vehicle Detection Loop with 30' Lead-In provides vehicle detection without cutting into the finished pavement. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Installation is a lay-and-pave job: set the loop on the graded sub-base, run the lead-in to the detector, and let the paving crew cover it. The 17' side covers the travel lane with roughly 3' of clearance on each side, and the 6' side reads vehicles as they roll through, making it a fit for oversized residential drives and small business/customer entrances.

Features:

• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
• Factory-set turn count means optimal read range without any on-site adjustment

Specifications:

• Loop type: Direct burial
• Total loop length: 46'
• Loop dimensions: 6' x 17'
• Lead-in length: 30'
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 23'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes