National Loop Co. 34' (5' X 12') Direct Burial Vehicle Detection Loop with 50' Lead-In for 17' Wide Driveways - E-NL17-18-50
Details
National Loop Co. 34' (5' X 12') Direct Burial Vehicle Detection Loop with 50' Lead-In for 17' Wide Driveways - E-NL17-18-50
Placed before the paving crew arrives, the National Loop Co. 34' Direct Burial Vehicle Detection Loop with 50' Lead-In is an 18 AWG inductive loop that disappears under the finished surface. Wired to a compatible automated system, the loop detects the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Installation is a lay-and-pave job: set the loop on the graded sub-base, run the lead-in to the detector, and let the paving crew cover it. With the 12' side crossing the lane and about 2' 6" of clearance per edge, and the 5' side capturing vehicles in the direction of travel, the layout fits 2-car drives in newer subdivisions and homes with boat or trailer parking.
Features:
- Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
- Arrives fully assembled and ready to install under new asphalt, concrete, or gravel
- Factory-set turn count means optimal read range without any on-site adjustment
- More cost-effective than hand-wound loop installations
- Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
- Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
Specifications:
- Loop type: Direct burial
- Total loop length: 34'
- Loop dimensions: 5' x 12'
- Lead-in length: 50'
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 17'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Direct Burial |
|---|---|
| Lead-In Length | 50' |
| Loop Length Size | 5' X 12' |
| Total Loop Length | 34' |
| SKU | E-NL17-18-50 |
| Product Type | Direct Burial Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |
| Specification Sheet | Download PDF file |