National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 175' Lead-In for 16' Wide Driveways - E-NL16-18-175

National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 175' Lead-In for 16' Wide Driveways - E-NL16-18-175

The National Loop Co. 32' Direct Burial Vehicle Detection Loop with 175' Lead-In senses the metal of passing vehicles and tells the gate system to open. Crews place it on the sub-base of a new drive or lot, then pave right over it with asphalt, concrete, or gravel. Shaped 4' x 12', its 32' of 18 AWG wire spans the lane on 16' wide driveways, from small apartment building lots and everyday 2-car suburban drives, with 175' of lead-in wire to reach the gate controller.
Part Number: E-NL16-18-175
$242.08 each $242.08 each
OR
 

Details

National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 175' Lead-In for 16' Wide Driveways - E-NL16-18-175

Sized to match a specific driveway width, the National Loop Co. 32' Direct Burial Vehicle Detection Loop with 175' Lead-In is a factory-wound 18 AWG loop for pave-over vehicle detection. Working through a compatible loop detector, it detects the metal mass of vehicles above. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. The 12' side covers the travel lane with roughly 2' of clearance on each side, and the 4' side reads vehicles as they roll through, making it a fit for common 2-car suburban driveways and small apartment building lots.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
  • Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
  • Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
  • Predetermined number of turns removes the guesswork of achieving optimal read range
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Direct burial
  • Total loop length: 32'
  • Loop dimensions: 4' x 12'
  • Lead-in length: 175'
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 16'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number E-NL16-18-175?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Direct Burial
Lead-In Length 175'
Loop Length Size 4' X 12'
Total Loop Length 32'
SKU E-NL16-18-175
Product Type Direct Burial Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file