Details

National Loop Co. 32' (4' X 12') Direct Burial Vehicle Detection Loop with 125' Lead-In for 16' Wide Driveways - E-NL16-18-125

The National Loop Co. 32' Direct Burial Vehicle Detection Loop with 125' Lead-In is an 18 AWG inductive loop that arrives preformed and ready to install, with its lead-in attached as part of the same continuous wire. Teamed with a loop detector, it gives the gate operator the presence detection UL 325 counts as one of its two means of entrapment protection, so the gate reverses or holds open while a vehicle sits in the path. Crews place the loop on the prepared sub-base before paving, and the new asphalt, concrete, or gravel surface locks it in place. With the 12' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits common 2-car suburban driveways and small apartment building lots.

Features:

• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field
• Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
• Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
• One continuous, non-spliced wire runs through the loop turns and lead-in, eliminating splice failures
• Liquid-tight conduit stands between the wire and sharp stones, chemicals, ground movement, and harsh weather
• Arrives fully assembled and ready to install under new asphalt, concrete, or gravel

Specifications:

• Loop type: Direct burial
• Total loop length: 32'
• Loop dimensions: 4' x 12'
• Lead-in length: 125'
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 16'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes