National Loop Co. 30' (4' X 11') Direct Burial Vehicle Detection Loop with 125' Lead-In for 15' Wide Driveways - E-NL15-18-125
Details
National Loop Co. 30' (4' X 11') Direct Burial Vehicle Detection Loop with 125' Lead-In for 15' Wide Driveways - E-NL15-18-125
Contractors laying new asphalt, concrete, or gravel can set the National Loop Co. 30' Direct Burial Vehicle Detection Loop with 125' Lead-In directly on the sub-base and pave right over it. Once a loop detector reads its signal, the loop covers the non-contact vehicle detection that UL 325 requires as one of the two means of entrapment protection for automated gates. Since the conduit protects the wire, the loop sits directly on the sub-base and gets buried under the new asphalt, concrete, or gravel surface. With the 11' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits standard 2-car driveways on modest suburban lots.
Features:
- Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
- Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
- Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
- Predetermined number of turns removes the guesswork of achieving optimal read range
- Saves labor cost compared with winding a loop by hand in the field
- Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
- Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
Specifications:
- Loop type: Direct burial
- Total loop length: 30'
- Loop dimensions: 4' x 11'
- Lead-in length: 125'
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 15'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Direct Burial |
|---|---|
| Lead-In Length | 125' |
| Loop Length Size | 4' X 11' |
| Total Loop Length | 30' |
| SKU | E-NL15-18-125 |
| Product Type | Direct Burial Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |
| Specification Sheet | Download PDF file |