National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 225' Lead-In for 11' Wide Driveways - E-NL11-18-225
Details
National Loop Co. 22' (4' X 7') Direct Burial Vehicle Detection Loop with 225' Lead-In for 11' Wide Driveways - E-NL11-18-225
Because it ships fully assembled in heavy-duty conduit, the National Loop Co. 22' Direct Burial Vehicle Detection Loop with 225' Lead-In is ready to lay down the moment the sub-base is graded. Working through a compatible loop detector, it detects the metal mass of vehicles above. Since the conduit protects the wire, the loop sits directly on the sub-base and gets buried under the new asphalt, concrete, or gravel surface. With the 7' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits slightly wider suburban single-car drives and older neighborhoods with wider lot cuts.
Features:
- Factory-set turn count means optimal read range without any on-site adjustment
- More cost-effective than hand-wound loop installations
- Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
- Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
- Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
- Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
Specifications:
- Loop type: Direct burial
- Total loop length: 22'
- Loop dimensions: 4' x 7'
- Lead-in length: 225'
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 11'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Direct Burial |
|---|---|
| Lead-In Length | 225' |
| Loop Length Size | 4' X 7' |
| Total Loop Length | 22' |
| SKU | E-NL11-18-225 |
| Product Type | Direct Burial Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |
| Specification Sheet | Download PDF file |