Details

National Loop Co. 18' (3' X 6') Direct Burial Vehicle Detection Loop with 200' Lead-In for 9' Wide Driveways - E-NL09-18-200

Made for new paving projects, the National Loop Co. 18' Direct Burial Vehicle Detection Loop with 200' Lead-In is a factory-wound 18 AWG loop that installs flat on the graded sub-base. Working through a compatible loop detector, it detects the metal mass of vehicles above, satisfying the non-contact detection that UL 325 lists as one of its two required means of entrapment protection. Because it ships encased in heavy-duty, liquid-tight conduit, the loop lays directly on the graded sub-base and is then paved over under fresh asphalt, concrete, or gravel. With the 6' side crossing the lane and about 1' 6" of clearance per edge, and the 3' side capturing vehicles in the direction of travel, the layout fits suburban single-car driveways, condo/townhome parking pads, and small ranch homes.

Features:

• Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
• Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
• Wound from one continuous, non-spliced wire, leaving no splice point between the loop and lead-in to fail
• Heavy-duty, liquid-tight conduit shields the loop from sharp stones, chemicals, ground heaving, and harsh weather
• Fully assembled at the factory, so there is nothing to wind, count, or connect before paving
• Predetermined number of turns removes the guesswork of achieving optimal read range
• Saves labor cost compared with winding a loop by hand in the field

Specifications:

• Loop type: Direct burial
• Total loop length: 18'
• Loop dimensions: 3' x 6'
• Lead-in length: 200'
• Wire gauge: 18 AWG
• Wire material: Polypropylene-wrapped copper wire
• Best-suited driveway width: 9'
• Manufacturer: National Loop Company (NLC)
• Made in America: Yes