National Loop Co. 84' (6' X 36') Saw Cut Vehicle Detection Loop with 50' Lead-In for 42' Wide Driveways - P-NL42-18-50
Details
National Loop Co. 84' (6' X 36') Saw Cut Vehicle Detection Loop with 50' Lead-In for 42' Wide Driveways - P-NL42-18-50
Sized to match a specific driveway width, the National Loop Co. 84' Saw Cut Vehicle Detection Loop with 50' Lead-In is a factory-wound 18 AWG loop for retrofit installations. Once a loop detector reads its signal, the loop covers the non-contact vehicle detection that UL 325 requires as one of the two means of entrapment protection for automated gates. Setup is a 3-step process: saw a 1/8" slot 1" deep in the pavement, press the loop in, and seal over it. Its 36' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to wide industrial driveways, truck wash facilities, and large church or school parking lot entrances.
Features:
- Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection
- Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
- One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
- Factory-set turn count means optimal read range without any on-site adjustment
- Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
- Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
- More cost-effective than hand-wound loop installations
Specifications:
- Loop type: Saw cut
- Total loop length: 84'
- Loop dimensions: 6' x 36'
- Lead-in length: 50'
- Slot size: 1/8" wide x 1" deep
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 42'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Saw Cut |
|---|---|
| Lead-In Length | 50' |
| Loop Length Size | 6' X 36' |
| Total Loop Length | 84' |
| Wire Size | 1/8" |
| SKU | P-NL42-18-50 |
| Product Type | Saw Cut Preformed Loop |
|
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |