National Loop Co. 84' (6' X 36') Saw Cut Vehicle Detection Loop with 225' Lead-In for 42' Wide Driveways - P-NL42-18-225

National Loop Co. 84' (6' X 36') Saw Cut Vehicle Detection Loop with 225' Lead-In for 42' Wide Driveways - P-NL42-18-225

Sensing traffic through the pavement itself, the National Loop Co. 84' Saw Cut Vehicle Detection Loop with a 225' lead-in gives the gate system reliable vehicle detection. Installers groove the existing drive, tuck the loop into the slot, and close it up with loop sealant. With 84' of wire laid out 6' x 36', it covers the lane on 42' wide driveways such as wide industrial driveways, truck wash facilities, and large church or school parking lots.
Part Number: P-NL42-18-225
$301.25 each $301.25 each
OR
 

Details

National Loop Co. 84' (6' X 36') Saw Cut Vehicle Detection Loop with 225' Lead-In for 42' Wide Driveways - P-NL42-18-225

Sized to match a specific driveway width, the National Loop Co. 84' Saw Cut Vehicle Detection Loop with 225' Lead-In is a factory-wound 18 AWG loop for retrofit installations. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Installation calls for sawing a 1/8" slot 1" deep into existing asphalt or concrete, laying the loop in the slot, and sealing it, with no hand-winding or turn counting required. Its 36' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to wide industrial driveways, truck wash facilities, and large church or school parking lot entrances.

Features:

  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations

Specifications:

  • Loop type: Saw cut
  • Total loop length: 84'
  • Loop dimensions: 6' x 36'
  • Lead-in length: 225'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 42'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL42-18-225?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 225'
Loop Length Size 6' X 36'
Total Loop Length 84'
Wire Size 1/8"
SKU P-NL42-18-225
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC