National Loop Co. 76' (6' X 32') Saw Cut Vehicle Detection Loop with 50' Lead-In for 38' Wide Driveways - P-NL38-18-50

National Loop Co. 76' (6' X 32') Saw Cut Vehicle Detection Loop with 50' Lead-In for 38' Wide Driveways - P-NL38-18-50

The National Loop Co. 76' Saw Cut Vehicle Detection Loop with 50' of lead-in to reach the detector signals the gate operator the moment traffic appears. Installers groove the existing drive, tuck the loop into the slot, and close it up with loop sealant. With 76' of wire laid out 6' x 32', it covers the lane on 38' wide driveways such as grain elevators, agricultural co-ops, and wide equipment yards.
Part Number: P-NL38-18-50
$209.37 each $209.37 each
OR
 

Details

National Loop Co. 76' (6' X 32') Saw Cut Vehicle Detection Loop with 50' Lead-In for 38' Wide Driveways - P-NL38-18-50

A preformed 18 AWG inductive loop built for saw-cut installation, the National Loop Co. 76' Saw Cut Vehicle Detection Loop with 50' Lead-In detects vehicles passing over the driveway. Wired to a compatible loop detector, the loop detects the metal of any vehicle over the sensing area so the gate stops or reverses before contact. Installers saw a 1/8" by 1" deep slot into the existing surface, drop the prewound loop in, and seal the slot against moisture. Across the 32' side it watches the full lane width, and down the 6' side it follows each vehicle's path, leaving about 3' of clearance at each edge for wide equipment yards, grain elevators, agricultural co-op entrances, and large commercial plaza entries.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of XLP-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Saw cut
  • Total loop length: 76'
  • Loop dimensions: 6' x 32'
  • Lead-in length: 50'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 38'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL38-18-50?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 50'
Loop Length Size 6' X 32'
Total Loop Length 76'
Wire Size 1/8"
SKU P-NL38-18-50
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC