National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 175' Lead-In for 36' Wide Driveways - P-NL36-18-175

National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 175' Lead-In for 36' Wide Driveways - P-NL36-18-175

The National Loop Co. 72' Saw Cut Vehicle Detection Loop with 175' Lead-In turns passing traffic into gate commands, opening for cars and trucks without a keypad or remote. Crews cut a narrow channel in the existing driveway, set the factory-wound loop inside, and seal it against moisture. Total wire runs 72' in a 6' x 30' layout, with 18 AWG conductors sized to 36' wide driveways at agricultural processing entrances and heavy equipment yards, while its 175' lead-in covers long runs to the detector.
Part Number: P-NL36-18-175
$263.25 each $263.25 each
OR
 

Details

National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 175' Lead-In for 36' Wide Driveways - P-NL36-18-175

Wound from one continuous length of 18 AWG wire, the National Loop Co. 72' Saw Cut Vehicle Detection Loop with 175' Lead-In installs in an existing paved surface through a simple saw-cut slot. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Installers saw a 1/8" by 1" deep slot into the existing surface, drop the prewound loop in, and seal the slot against moisture. With the 30' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits truck yards, heavy equipment facilities, and agricultural processing entrances.

Features:

  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters

Specifications:

  • Loop type: Saw cut
  • Total loop length: 72'
  • Loop dimensions: 6' x 30'
  • Lead-in length: 175'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 36'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL36-18-175?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 175'
Loop Length Size 6' X 30'
Total Loop Length 72'
Wire Size 1/8"
SKU P-NL36-18-175
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC