National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 100' Lead-In for 36' Wide Driveways - P-NL36-18-100

National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 100' Lead-In for 36' Wide Driveways - P-NL36-18-100

Where gates open for traffic on their own, the National Loop Co. 72' Saw Cut Vehicle Detection Loop with a 100' lead-in senses the metal of any car or truck that crosses it. Installation calls for a 1" deep slot saw cut into the existing asphalt or concrete, with the loop pressed in and the cut sealed. Its 72' of wire forms a 6' x 30' rectangle sized for 36' wide driveways at truck yards, heavy equipment facilities, and agricultural processing entrances.
Part Number: P-NL36-18-100
$220.77 each $220.77 each
OR

Details

National Loop Co. 72' (6' X 30') Saw Cut Vehicle Detection Loop with 100' Lead-In for 36' Wide Driveways - P-NL36-18-100

The National Loop Co. 72' Saw Cut Vehicle Detection Loop with 100' Lead-In is a preformed 18 AWG inductive vehicle detection loop that arrives ready to drop into a saw-cut slot. Working through a compatible loop detector, it detects the metal mass of vehicles above. Fitting takes one shallow saw cut: a 1/8" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. Its 30' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to truck yards, heavy equipment facilities, and agricultural processing entrances.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Saw cut
  • Total loop length: 72'
  • Loop dimensions: 6' x 30'
  • Lead-in length: 100'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 36'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL36-18-100?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 100'
Loop Length Size 6' X 30'
Total Loop Length 72'
Wire Size 1/8"
SKU P-NL36-18-100
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC