National Loop Co. 68' (6' X 28') Saw Cut Vehicle Detection Loop with 100' Lead-In for 34' Wide Driveways - P-NL34-18-100
Details
National Loop Co. 68' (6' X 28') Saw Cut Vehicle Detection Loop with 100' Lead-In for 34' Wide Driveways - P-NL34-18-100
Installing the National Loop Co. 68' Saw Cut Vehicle Detection Loop with 100' Lead-In means sawing one slot, laying in a preformed 18 AWG loop, and sealing it. Once a loop detector reads its signal, the loop covers the non-contact vehicle detection that UL 325 requires as one of the two means of entrapment protection for automated gates. Installers saw a 1/8" by 1" deep slot into the existing surface, drop the prewound loop in, and seal the slot against moisture. Its 28' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to industrial or municipal lots and large estate entrances.
Features:
- Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
- More cost-effective than hand-wound loop installations
- Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
- Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
- Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
- Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
- Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
Specifications:
- Loop type: Saw cut
- Total loop length: 68'
- Loop dimensions: 6' x 28'
- Lead-in length: 100'
- Slot size: 1/8" wide x 1" deep
- Wire gauge: 18 AWG
- Wire material: Polypropylene-wrapped copper wire
- Best-suited driveway width: 34'
- Manufacturer: National Loop Company (NLC)
- Made in America: Yes
| Loop Type | Saw Cut |
|---|---|
| Lead-In Length | 100' |
| Loop Length Size | 6' X 28' |
| Total Loop Length | 68' |
| Wire Size | 1/8" |
| SKU | P-NL34-18-100 |
| Product Type | Saw Cut Preformed Loop |
Made In America
Learn More About BABA Certification
|
Yes |
| Ideal Application | Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters |
| Material | Polypropylene-Wrapped Copper Wires |
| Manufacturer | National Loop Company - NLC |