National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 30' Lead-In for 26' Wide Driveways - P-NL26-18-30

National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 30' Lead-In for 26' Wide Driveways - P-NL26-18-30

The National Loop Co. 52' Saw Cut Vehicle Detection Loop with 30' Lead-In spots vehicles at the gate line without buttons, cameras, or physical contact. That detection keeps the gate from closing on a car in its path. A saw, a 1" cut, and a bead of sealant put this loop to work in finished asphalt or concrete. An 18 AWG perimeter of 52' wraps into a 6' x 20' footprint made for 26' wide drives, from 3-car-wide residential drives and light commercial entries.
Part Number: P-NL26-18-30
$152.90 each $152.90 each
OR

Details

National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 30' Lead-In for 26' Wide Driveways - P-NL26-18-30

A preformed 18 AWG inductive loop built for saw-cut installation, the National Loop Co. 52' Saw Cut Vehicle Detection Loop with 30' Lead-In detects vehicles passing over the driveway. Once a loop detector reads its signal, the loop provides the non-contact vehicle detection automated gates rely on. Setup is a 3-step process: saw a 1/8" slot 1" deep in the pavement, press the loop in, and seal over it. With the 20' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits 3-car-wide residential drives and light commercial entries.

Features:

  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations

Specifications:

  • Loop type: Saw cut
  • Total loop length: 52'
  • Loop dimensions: 6' x 20'
  • Lead-in length: 30'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 26'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL26-18-30?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 30'
Loop Length Size 6' X 20'
Total Loop Length 52'
Wire Size 1/8"
SKU P-NL26-18-30
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file