National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 250' Lead-In for 26' Wide Driveways - P-NL26-18-250

National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 250' Lead-In for 26' Wide Driveways - P-NL26-18-250

Keeping an automatic gate both safe and convenient, the National Loop Co. 52' Saw Cut Vehicle Detection Loop with 250' of lead-in to reach the detector spots cars and trucks without any physical contact. It installs through a 1" deep saw cut in existing asphalt or concrete, so the finished surface stays largely intact. Formed as a 6' x 20' rectangle with 52' of perimeter, it matches the 26' drives found at light commercial entries and roomy 3-car residential drives.
Part Number: P-NL26-18-250
$249.64 each $249.64 each
OR
 

Details

National Loop Co. 52' (6' X 20') Saw Cut Vehicle Detection Loop with 250' Lead-In for 26' Wide Driveways - P-NL26-18-250

Installing the National Loop Co. 52' Saw Cut Vehicle Detection Loop with 250' Lead-In means sawing one slot, laying in a preformed 18 AWG loop, and sealing it. Teamed with a loop detector, it gives the gate operator the presence detection it needs, so the gate reverses or holds open while a vehicle sits in the path. Installers saw a 1/8" by 1" deep slot into the existing surface, drop the prewound loop in, and seal the slot against moisture. Its 20' side spans the travel lane while the 6' side runs in the direction of traffic, leaving roughly 3' of clearance on each edge, an arrangement well suited to 3-car-wide residential drives and light commercial entries.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field

Specifications:

  • Loop type: Saw cut
  • Total loop length: 52'
  • Loop dimensions: 6' x 20'
  • Lead-in length: 250'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 26'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL26-18-250?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 250'
Loop Length Size 6' X 20'
Total Loop Length 52'
Wire Size 1/8"
SKU P-NL26-18-250
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file