National Loop Co. 42' (6' X 15') Saw Cut Vehicle Detection Loop with 175' Lead-In for 21' Wide Driveways - P-NL21-18-175

National Loop Co. 42' (6' X 15') Saw Cut Vehicle Detection Loop with 175' Lead-In for 21' Wide Driveways - P-NL21-18-175

Sensing traffic through the pavement itself, the National Loop Co. 42' Saw Cut Vehicle Detection Loop with 175' of lead-in wire gives the gate system reliable vehicle detection. You saw a thin slot in the existing drive, drop the loop in, and seal it, with no demolition required. The 6' x 15' rectangle carries 42' of detection wire, sized to 21' wide driveways at 2-car drives with guest parking and wider rural or farm gate entrances.
Part Number: P-NL21-18-175
$206.79 each $206.79 each
OR

Details

National Loop Co. 42' (6' X 15') Saw Cut Vehicle Detection Loop with 175' Lead-In for 21' Wide Driveways - P-NL21-18-175

Built for retrofitting an existing paved driveway, the National Loop Co. 42' Saw Cut Vehicle Detection Loop with 175' Lead-In is a factory-wound 18 AWG inductive loop ready to lay into a saw-cut slot. Working through a compatible loop detector, it detects the metal mass of vehicles above. The install method is a 1/8" wide, 1" deep saw cut in the existing asphalt or concrete, with the loop laid in and sealed to finish the job. With the 15' side crossing the lane and about 3' of clearance per edge, and the 6' side capturing vehicles in the direction of travel, the layout fits 2-car plus guest parking and wider rural/farm gate entrances.

Features:

  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters
  • One continuous, non-spliced Polypropylene-insulated wire runs through the loop turns and lead-in, eliminating splice failures
  • Factory-set turn count means optimal read range without any on-site adjustment
  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations

Specifications:

  • Loop type: Saw cut
  • Total loop length: 42'
  • Loop dimensions: 6' x 15'
  • Lead-in length: 175'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 21'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL21-18-175?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 175'
Loop Length Size 6' X 15'
Total Loop Length 42'
Wire Size 1/8"
SKU P-NL21-18-175
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file