National Loop Co. 24' (4' X 8') Saw Cut Vehicle Detection Loop with 250' Lead-In for 12' Wide Driveways - P-NL12-18-250

National Loop Co. 24' (4' X 8') Saw Cut Vehicle Detection Loop with 250' Lead-In for 12' Wide Driveways - P-NL12-18-250

Monitoring the driveway around the clock, the National Loop Co. 24' Saw Cut Vehicle Detection Loop with 250' of lead-in to reach the detector helps automatic gates meet UL 325 by supplying one of the two required means of entrapment protection. It installs through a 1" deep saw cut in existing asphalt or concrete, so the finished surface stays largely intact. Formed as a 4' x 8' rectangle with 24' of perimeter, it matches the 12' drives found at newer suburban builds and small business side lots.
Part Number: P-NL12-18-250
$213.33 each $213.33 each
OR
 

Details

National Loop Co. 24' (4' X 8') Saw Cut Vehicle Detection Loop with 250' Lead-In for 12' Wide Driveways - P-NL12-18-250

Wound from one continuous length of 18 AWG wire, the National Loop Co. 24' Saw Cut Vehicle Detection Loop with 250' Lead-In installs in an existing paved surface through a simple saw-cut slot. Once a loop detector reads its signal, the loop covers the non-contact vehicle detection that UL 325 requires as one of the two means of entrapment protection for automated gates. The install method is a 1/8" wide, 1" deep saw cut in the existing asphalt or concrete, with the loop laid in and sealed to finish the job. Its 8' side spans the travel lane while the 4' side runs in the direction of traffic, leaving roughly 2' of clearance on each edge, an arrangement well suited to comfortable single-car driveways, newer suburban builds, and small business side lots.

Features:

  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field
  • Provides the non-contact vehicle detection UL 325 gate systems count toward their two required means of entrapment protection

Specifications:

  • Loop type: Saw cut
  • Total loop length: 24'
  • Loop dimensions: 4' x 8'
  • Lead-in length: 250'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 12'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL12-18-250?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 250'
Loop Length Size 4' X 8'
Total Loop Length 24'
Wire Size 1/8"
SKU P-NL12-18-250
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file