National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 225' Lead-In for 16' Wide Driveways - P-NL16-18-225

National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 225' Lead-In for 16' Wide Driveways - P-NL16-18-225

Behind every loop detector sits a coil of wire, and the National Loop Co. 32' Saw Cut Vehicle Detection Loop with a 225' lead-in senses the metal of any car or truck that crosses it. The pavement stays in service, as only a narrow 1" slot is opened to receive the wire and then sealed. The rectangle measures 4' x 12', putting 32' of wire to work across 16' wide driveways like common 2-car suburban driveways and small apartment building lots.
Part Number: P-NL16-18-225
$213.75 each $213.75 each
OR
 

Details

National Loop Co. 32' (4' X 12') Saw Cut Vehicle Detection Loop with 225' Lead-In for 16' Wide Driveways - P-NL16-18-225

Designed to sense vehicles without any surface teardown, the National Loop Co. 32' Saw Cut Vehicle Detection Loop with 225' Lead-In is a preformed 18 AWG loop that drops into a saw-cut slot. Once a loop detector reads its signal, the loop provides the non-contact vehicle detection automated gates rely on. Fitting takes one shallow saw cut: a 1/8" slot, 1" deep, cleaned out, filled with the loop, and sealed with loop sealant. With the 12' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits common 2-car suburban driveways and small apartment building lots.

Features:

  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range
  • Neatly stacked turns accept loop sealant completely, locking out moisture for long service life
  • Optimizes read range, eliminates faulty signals, and minimizes callbacks
  • Saves labor cost compared with winding a loop by hand in the field
  • Works wherever vehicles need detecting: automatic gates, parking barriers, overhead doors, traffic signals, arming devices, and vehicle counters

Specifications:

  • Loop type: Saw cut
  • Total loop length: 32'
  • Loop dimensions: 4' x 12'
  • Lead-in length: 225'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 16'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL16-18-225?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 225'
Loop Length Size 4' X 12'
Total Loop Length 32'
Wire Size 1/8"
SKU P-NL16-18-225
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file