National Loop Co. 28' (4' X 10') Saw Cut Vehicle Detection Loop with 200' Lead-In for 14' Wide Driveways - P-NL14-18-200

National Loop Co. 28' (4' X 10') Saw Cut Vehicle Detection Loop with 200' Lead-In for 14' Wide Driveways - P-NL14-18-200

Monitoring the driveway around the clock, the National Loop Co. 28' Saw Cut Vehicle Detection Loop with its 200' lead-in meets the gate safety standard with one of the two means of entrapment protection set out in UL 325. Crews cut a narrow channel in the finished pavement, set the preformed wire inside, and seal it against moisture. Total wire runs 28' in a 4' x 10' pattern made for 14' wide driveways, including long rural drives and roomy single-car or snug 2-car lots.
Part Number: P-NL14-18-200
$198.60 each $198.60 each
OR
 

Details

National Loop Co. 28' (4' X 10') Saw Cut Vehicle Detection Loop with 200' Lead-In for 14' Wide Driveways - P-NL14-18-200

Gate installers can turn an existing driveway into part of the safety system with the National Loop Co. 28' Saw Cut Vehicle Detection Loop with 200' Lead-In, a preformed 18 AWG inductive loop. Paired with a compatible loop detector, it senses the metal mass of a passing car or truck and signals the gate operator to open, hold, or reverse, providing one of the two means of entrapment protection UL 325 requires for automated gates. Setup is a 3-step process: saw a 1/8" slot 1" deep in the pavement, press the loop in, and seal over it. With the 10' side crossing the lane and about 2' of clearance per edge, and the 4' side capturing vehicles in the direction of travel, the layout fits wide single-car or tight 2-car driveways and long rural drives.

Features:

  • Precisely stacked wires let loop sealant fully encapsulate the loop for lasting weather protection
  • Cuts down on faulty detection calls and repeat service trips thanks to consistent machine winding
  • More cost-effective than hand-wound loop installations
  • Fills the non-contact detection role UL 325 assigns to vehicle loops in a 2-device entrapment protection system
  • Designed for vehicle detection with gate operators, parking barrier gates, overhead doors, traffic signals, arming devices, and vehicle counters
  • Wound from one continuous, non-spliced length of Polypropylene-insulated wire, leaving no splice point between the loop and lead-in to fail
  • Predetermined number of machine-wound turns removes the guesswork of achieving optimal read range

Specifications:

  • Loop type: Saw cut
  • Total loop length: 28'
  • Loop dimensions: 4' x 10'
  • Lead-in length: 200'
  • Slot size: 1/8" wide x 1" deep
  • Wire gauge: 18 AWG
  • Wire material: Polypropylene-wrapped copper wire
  • Best-suited driveway width: 14'
  • Manufacturer: National Loop Company (NLC)
  • Made in America: Yes
Prefer to Call? (888) 378-1175

Questions about part number P-NL14-18-200?

Required Fields *

Name *

Email *

Phone

My Questions *

Loop Type Saw Cut
Lead-In Length 200'
Loop Length Size 4' X 10'
Total Loop Length 28'
Wire Size 1/8"
SKU P-NL14-18-200
Product Type Saw Cut Preformed Loop
Made In America Tooltip
Learn More About BABA Certification
Yes
Ideal Application Access Control, Arming Devices, Gate Operators, Overhead Doors, Parking Barrier Gates, Traffic Signals, Vehicle Counters
Material Polypropylene-Wrapped Copper Wires
Manufacturer National Loop Company - NLC
Specification Sheet Download PDF file